-
CYC Speed Sensor Extension Wire, for your CYC x1 PRO Gen 3, Gen 3 Stealth or Photon eBike. Includes 1x extension wire for speed sensor. Speed sensor extension wire for CYC X6/ X12, 7-pin male to female cable, Length = 300mm/ 650mm See full description. -
CYC Nylon Bearing Covers - Pair -
CYC 1 to 1 Wiring Harness The 1 to 1 wiring harness connects your CYC Photon controller to the display. When using display only without a throttle. Keeps wiring slim and clean. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:- 1-1 wiring harness
-
CYC Retaining Lock Ring, for you Gen 3 models. Includes: 1x Left Retaining Lock Ring Compatible with CYC X1 Gen 3 ISIS splined spindle only.13 Please see full description. -
CYC Full Twist Throttle: for your CYC X1 Stealth, Pro or Photon ebike. Includes 1x full twist throttle and matching grip Motor compatibility: X1 Pro, X1 Stealth and Photon Controllers compatibility: BAC855, BAC2000, X6, and X12 Please see full description. -
CYC Thumb Throttle for your CYC X1 Pro, Photon or Stealth eBike. Includes: 1x universal thumb throttle Specifications:- Left or right side handlebar mounting
- Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3, & Photon
-
CYC Half Twist Throttle for your CYC X1 Gen 3 Pro, Stealth or Photon eBike.- Compatible with X1 Gen 3 Pro, Stealth or Photon
- Includes: throttle and matching grip Connector: Julet
-
CYC PHOTON Chainring Removal ToolFinally available, the tool you’ve been waiting for! Securely plug in this 5-pronged tool to your center chainring retention ring to remove and install your chainring assembly. You can now easily switch between chainring sizes without contacting customer support for help.
- Full 360 degree contact - means no slipping.
- Built-in nut accepts a 22mm socket (or 7/8” if you must).
- Use an actual torque wrench for worry-free installs.
- Available in any color you want, as long as it’s black.
- Compatible with your CYC Photon eConversion System.
-
CYC Aluminum Cover Replacement for your CYC X1 Pro eBike.- Aluminum cover replacement for original glass cover. Compatible with X1 Pro
-
CYC 1 to 2 Wiring with Throttle Upgrade Option The 1 to 2 wiring harness connects your controller to the display and the throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:- 1-2 wiring harness
- Optional Upgrade: Thumb throttle/ Full twist throttle/ Half-twist throttle
-
CYC Magnetic Break Sensors Includes: 2x magnetic brake sensors & 2x magnets. Installation guide provided. Not compatible with X1 Pro Gen 1. Please see full description -
Gen 3 Stealth and X1 Pro Controller Extension Wires -
CYC Gen 3 Stealth and X1 Pro controller Mounting BracketInstallation Guide provided, please full details. -
CYC 1 to 4 Wiring with Throttle Upgrade and Brake Sensor Option The 1 to 4 wiring harness connects your controller to the display, brake sensors, and throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:- 1-4 wiring harness
- Thumb throttle/ full twist throttle/ half-twist throttle (optional)
- Magnetic brake sensors (optional)
-
CYC Speed Sensor and Bluetooth Module (X6 and X12 only)NOTE: This is for the X6 and X12 ControllerThe CYC speed sensors reads your speed via pulses detected from the speed sensor magnet as it moves with your wheel. This unit also houses the Bluetooth control module that is needed to connect to the CYC Ride Control app.- 7 Pin Male Connector- Includes Magnet- Installation GuidePlease read full description -
CYC 42 Tooth Sprocket and Chainring CoverFor use on your existing 38-50 T Chainring Adapter. Must use 2-prong tool that came with your kit to remove and install.Specifications:- 42 Tooth Sprocket
- Chainring Cover
-
The CYC eBike Headlights are ideal for night rides. With high and low beam lights, you can ride comfortably in lowlight situations. Includes:- eBike low & high beam headlights
- 2x mounting sets for each light
- Bolts & hex keys needed
-
- Connector = XT-90 male & female connector
- Compatibility = X1 Stealth, X1 Pro, & Photon kits
- Power consuption = 18W per bulb
- Supported Voltages = 36V to 72V nominal voltage
- See full description for details.
-
ISIS Crank Arm Set, for your CYC Gen 3 and Photon CYC's ISIS crank arm set is a 5 degrees off-set, made to be paired with the Gen 3 and Photon kits. Ride with confidence knowing that your cranks won't give in even in extreme terrains. Includes:- Left & Right side crank arm
- Length Options: 165mm or 175mm
- Material = 7075-t6 aluminium
- Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3, Photon
-
CYC Photon Chainring Set This is the complete set needed to change or replace the CYC Photon chainring, select from 34 Tooth, 38 Tooth, 42 Tooth or 50 Tooth. Includes:- Starfish adaptor
- Chainring
- Aluminum chainring cover
-
The SW102 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's convenient formfactor leaves you with plenty of space on your handlebars. Plug-n-play ready. Includes:- SW102 display
- Nominal Voltage = 36-52V
- Waterproof = IP65
- Controller Compatibility = X6P, X6, & X12
- Operating temperature = -20°C to 60°C
- Screen specification = 1.3”OLED（64*128pixels）
-
The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready. Includes:- DS103 display
- Nominal Voltage = 36-52V
- Waterproof = IP65
- Controller Compatibility = X6P, X6, & X12
- Operating temperature = -20°C to 60°C
- Screen specification = 3.5” colored TFT (480*320pixels)
-
CYC Right Bottom Bracket Cup with Gen 3 Freewheel and Torque Sensor Assembly with Nylon CoverFor Gen 3 X1 Stealth and X1 Pro only. Includes HD Freewheel and Torque Sensor for easy replacement. -
NEW X12 Controller - 5,000 Watts!
Be the first to receive the new, long awaited X12 Controller for a direct swap out on your X1 Pro Gen 3!- Runs 36v-72v eBike Batteries
- 8 Gauge Phase Wires
- The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
- Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
-
Swap your X1 Pro Gen 3
with the X1 Pro Gen 4 Motor (includes the NEW X12 Controller - 5,000 Watts)!
- Runs 36v-72v eBike Batteries
- 8 Gauge Phase Wires
- The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
- Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
-
Powerful, Quiet, Lightweight and Intuitive.
The Photon is beautifully designed and created by CYC Motor, Ltd., the Photon brings you a High Performance and state-of-the-art E-bike conversion kit unlike any other. The research and thoughtfulness put into this model, brings you technology advancements unfound in other factory model mid-drive motors. Featuring an easy DIY plug-n-play installation, simple programming that can also be accomplished through your smart phone, and much more. The package includes everything you need to convert your bike except the battery:- Motor body with Gen 3 torque sensing freewheel module
- Built-in CYC XP6 controller
- Chainring with chainring cover
- Bottom bracket assembly
- Crank set
- Peripherals including
- Display
- Waterproof wiring
- Thumb throttle
- Speed sensor
- Brake sensors (optional)
- User manual (ecopy)
- eBike Headlights (optional)
-
THE MOUNTAIN CRUSHER, ALL-TERRAIN RIDING THRILL Power mighty with the X1 Stealth Gen 3. Designed for all terrains, climb that mountain with advanced torque sensing, instant throttle capabilities, and customized tuning. Made for a powerful, performance enhanced riding experience.- RATED POWER: 1500W
- PEAK TORQUE: 150N.m.
- COMPATIBLE: 36V to 52V
- CHAINRING OPTIONS: 32T & 38T (30-46T with BCD104)
- BOTTOM BRACKET OPTIONS: 68-120MM
- BB92 SUPPORTED
- torque sensing capabilities
- fully customizable mobile app
- Range of bottom bracket sizes
- High clearance
- Fits all frame types including carbon
- 2 rider modes (e.g., street, off-road)
- 9 assist levels
Get an EXTRA 10% OFF select Packs!
To claim your special offer, add the CYC Stealth to your cart.
-
The Ultimate High Power Combo - NEW from CYC Motors- The X1 Pro Gen 4 - 5,000 Watts out of the box!!!
- Beefier Motor, includes the New X12 Controller
- RATED POWER: 5000W
- PEAK TORQUE: 250N.m./250N.m.
- COMPATIBLE: 36V to 72V
- CHAINRING OPTIONS: 32T & 38T (30-52T with BCD104)
- BOTTOM BRACKET OPTIONS: 68-120MM
Fits All Common Bottom Brackets: The Gen 4 X1 PRO fits all standard and fat bike bottom brackets from 68mm to 120mm. It has a special BB92 Version which has a spot on chainline. BB92 Pressfit frame is common in modern mountain bike frame. It is typically very difficult to convert BB92 bike into electric due to the offset chainline. The BB92 is designed to be direct fit and with a perfect chainline of 51mm.CYC Ride Control:Pair the CYC Ride Control mobile app with the X-Controller Series and it gives you the ultimate freedom to ride your way. Via Bluetooth connectivity, we have ensured that your ebike experience is now more integrated than ever.Torque & Cadence Sensors: X1 PRO comes with a Torque sensor that is used in pedal assist mode. The torque sensor measures how hard and cadence measures how fast you pedal. These are collected and processed together by the controller to provide natural feeling of pedal assist and calculates how much power the motor should output correspondingly. A big bonus is that it also measures and records your own power via the mobile app so you can monitor your exercise rate. You can also customize the proportion of the motor power output in case you want to change the ratio of assist. EMTB mode when using comparable power levels.Warning: This beast is for the thrill seeker enthusiast. Read full description before you accept more power into your life.
Special Offer: 10% OFF select packs! To claim this special offer, customize your CYC kit and add to the cart.
-
Your bike is waiting ...
to be transformed into a High-Performance e-Bike Machine!
Brought to you by three worldwide and local e-Bike Conversion Technology experts: CYC Motor's Photon, Bethlehem e-Bike and Bicycle Motor Works.
*** This offer is only available within the surrounding areas of Lehigh Valley, Pa.
Made in Bethlehem eBike Conversion Package Let us transform your comfortable, most loved bicycle into a powerful state-of-the-art vehicle with CYC Motor's Photon eBike conversion solution. The Photon is uniquely versatile, thoughtfully designed to integrate into most frames. This high performance motor, features torque and cadence sensing brackets, smoothly delivering power at the cadence you choose and intuitively delivering less or more power based on your exertion. Other advancements include, personalizing your system for an ultimate experience with simply accomplished programming through your smartphone. Your high-performance motor will be powered by our Custom Designed Lock and Mounting Wedge Series: 52v 10ah Samsung 50S Wedge eBike Battery. The Wedge features a hard lock and built-in mounting encasement, that is custom designed by worldwide known manufacturer, Lekkie. Every Bicycle Motor Work eBike Battery is proudly made in the U.S., using pure copper busbars, high-quality materials and certified premium cells sourced from a U.S. distributor. This package includes a Full eBike Conversion Service by Bethlehem eBike's expert builder, Chris Briggs. Thats right, let the experts do the work! Receive an introductory consultant to review the process, verify any additional customization needs and schedule your for bike drop-off. What's Included:- CYC's Photon eBike Conversion System - Powerful, Lightweight and Intuitive
- Bicycle Motor Work's The Wedge eBike Battery Pack- 52v 10ah Samsung 50S
- eBike Conversion service provided by renowned, Bethlehem eBike's Chris Briggs
- Contact us to make sure your bike frame will fit the Photon.
- Select your options, purchase and check your email.
- Your email will instruct you to contact Bethlehem eBike to pickup/drop off your bike.
- Within 2 weeks your bike will be fully converted and ready to ride!
