FacebookInstagramYouTubeLinkedIn
  • A close up of the parts of a bicycle A black bicycle wheel with two different wheels on it.

    CYC Photon

    $950.00

    Powerful, Quiet, Lightweight and Intuitive.

    The Photon is beautifully designed and created by CYC Motor, Ltd., the Photon brings you a High Performance and state-of-the-art E-bike conversion kit unlike any other. The research and thoughtfulness put into this model, brings you technology advancements unfound in other factory model mid-drive motors. Featuring an easy DIY plug-n-play installation, simple programming that can also be accomplished through your smart phone, and much more. The package includes everything you need to convert your bike except the battery:
    1. Motor body with Gen 3 torque sensing freewheel module
    2. Built-in CYC XP6 controller 
    3. Chainring with chainring cover
    4. Bottom bracket assembly
    5. Crank set
    6. Peripherals including
      1. Display
      2. Waterproof wiring
      3. Thumb throttle
      4. Speed sensor
      5. Brake sensors (optional)
    7. User manual (ecopy)
    8. eBike Headlights (optional) 
    Please see full description.
    Select options Details
  • A close up of the front wheel on an electric bike A black and white photo of an electric motor.

    CYC X1 Stealth Gen 3

    $1,050.00
    THE MOUNTAIN CRUSHER, ALL-TERRAIN RIDING THRILL Power mighty with the X1 Stealth Gen 3. Designed for all terrains, climb that mountain with advanced torque sensing, instant throttle capabilities, and customized tuning. Made for a powerful, performance enhanced riding experience.
    • RATED POWER: 1500W
    • PEAK TORQUE: 150N.m.
    • COMPATIBLE: 36V to 52V
    • CHAINRING OPTIONS: 32T & 38T (30-46T with BCD104)
    • BOTTOM BRACKET OPTIONS: 68-120MM
    • BB92 SUPPORTED
    The X1 Stealth is the all new lightweight mid drive conversion system. With up to 1500W of power output, a small form factor, and quiet performance, this is the ideal system for riders wanting a stealthy setup. The X1 Stealth is complete with:
    • torque sensing capabilities
    • fully customizable mobile app
    • Range of bottom bracket sizes
    • High clearance
    • Fits all frame types including carbon
    • 2 rider modes (e.g., street, off-road)
    • 9 assist levels​
    Please read full details. *** Due to heavy demands, please allow batteries approximately 2-3 weeks to ship.

    Get an EXTRA 10% OFF select Packs!

    To claim your special offer, add the CYC Stealth to your cart.
     
    Select options Details
  • A set of hardware for the door locks. A close up of the electronic components on a table

    eBike Headlights

    $60.00
    The CYC eBike Headlights are ideal for night rides. With high and low beam lights, you can ride comfortably in lowlight situations. Includes:
    • eBike low & high beam headlights
    • 2x mounting sets for each light
    • Bolts & hex keys needed
    Specification:
      • Connector = XT-90 male & female connector
      • Compatibility = X1 Stealth, X1 Pro, & Photon kits
      • Power consuption = 18W per bulb
      • Supported Voltages = 36V to 72V nominal voltage
    • See full description for details.
     
    Add to cart Details
  • Two wires are connected to each other. Two different types of cables are shown.

    eBike Speed Sensor Extension Wire

    $8.00
    CYC Speed Sensor Extension Wire, for your CYC x1 PRO Gen 3, Gen 3 Stealth or Photon eBike. Includes 1x extension wire for speed sensor. Speed sensor extension wire for CYC X6/ X12, 7-pin male to female cable, Length = 300mm/ 650mm See full description.  
    Select options Details
  • A pair of black and silver handles with a wire. A pair of black and silver jump ropes with an orange cable.

    eBike Full Twist Throttle

    $18.00
    CYC Full Twist Throttle: for your CYC X1 Stealth, Pro or Photon ebike. Includes 1x full twist throttle and matching grip Motor compatibility: X1 Pro, X1 Stealth and Photon Controllers compatibility: BAC855, BAC2000, X6, and X12 Please see full description.  
    Add to cart Details
  • A black cable with an electric plug attached to it. A black bicycle handlebar mount with an extension cable attached.

    eBike Thumb Throttle

    $18.00
    CYC Thumb Throttle for your CYC X1 Pro, Photon or Stealth eBike. Includes: 1x universal thumb throttle Specifications:
    • Left or right side handlebar mounting
    • Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3, & Photon
    Please see full description.  
    Add to cart Details
  • A pair of black plastic tubes with wires attached to them. A pair of black plastic tubes with yellow lights.

    eBike Half Twist Throttle

    $18.00
    CYC Half Twist Throttle for your CYC X1 Gen 3 Pro, Stealth or Photon eBike.
    • Compatible with X1 Gen 3 Pro, Stealth or Photon
    • Includes: throttle and matching grip Connector: Julet
    Please see full description.  
    Add to cart Details
  • Two red and one gray plastic discs on a white background A pair of black and red rubber washers.

    eBike Aluminum Cover Replacement

    $20.00
    CYC Aluminum Cover Replacement for your CYC X1 Pro eBike.
    • Aluminum cover replacement for original glass cover. Compatible with X1 Pro
    Please see full description.  
    Add to cart Details
  • A drawing of the inside of a ds 1 0 2 and sw 1 0 3 A black device with green light on it.

    SW102 Display

    $75.00
    The SW102 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's convenient formfactor leaves you with plenty of space on your handlebars. Plug-n-play ready. Includes:
    • SW102 display
    Specifications:
    • Nominal Voltage = 36-52V
    • Waterproof = IP65
    • Controller Compatibility = X6P, X6, & X12
    • Operating temperature = -20°C to 60°C
    • Screen specification = 1.3”OLED（64*128pixels）
    Please see full description.  
    Add to cart Details
  • A black device with a green light on it. A tablet and charger on a table.

    DS103 Display

    $95.00
    The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready. Includes:
    • DS103 display
    Specifications:
    • Nominal Voltage = 36-52V
    • Waterproof = IP65
    • Controller Compatibility = X6P, X6, & X12
    • Operating temperature = -20°C to 60°C
    • Screen specification = 3.5” colored TFT (480*320pixels)
    Please see full description.  
    Add to cart Details
  • A black metal ring with a silver ball on top.

    Retaining Lock Ring

    $13.00
    CYC Retaining Lock Ring, for you Gen 3 models. Includes: 1x Left Retaining Lock Ring Compatible with CYC X1 Gen 3 ISIS splined spindle only.13 Please see full description.  
    Add to cart Details
  • A pair of black bicycle forks with the word gnc on them. A pair of black handles with the word " echopotor ".

    ISIS Crank Arm Set

    $60.00
    ISIS Crank Arm Set, for your CYC Gen 3 and Photon CYC's ISIS crank arm set is a 5 degrees off-set, made to be paired with the Gen 3 and Photon kits. Ride with confidence knowing that your cranks won't give in even in extreme terrains. Includes:
    • Left & Right side crank arm
    • Length Options: 165mm or 175mm
    Specifications:
    • Material = 7075-t6 aluminium
    • Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3,  Photon
    See full description.  
    Select options Details
  • A black cord with an antenna attached to it.

    Magnetic Speed Sensor and Bluetooth Module

    $30.00
    CYC Speed Sensor and Bluetooth Module (X6 and X12 only) 
    NOTE: This is for the X6 and X12 Controller
    The CYC speed sensors reads your speed via pulses detected from the speed sensor magnet as it moves with your wheel.  This unit also houses the Bluetooth control module that is needed to connect to the CYC Ride Control app.
    - 7 Pin Male Connector
    - Includes Magnet
    - Installation Guide
    Please read full description
     
    Add to cart Details
  • A black and silver object with a wire around it. A black motor with wires attached to it.

    Right Bottom Bracket Cup with Gen 3 Freewheel and Torque Sensor Assembly with Nylon Cover

    $230.00
    CYC Right Bottom Bracket Cup with Gen 3 Freewheel and Torque Sensor Assembly with Nylon Cover
    For Gen 3 X1 Stealth and X1 Pro only.  Includes HD Freewheel and Torque Sensor for easy replacement.
     
    Add to cart Details
  • A pair of black plastic rings sitting on top of each other. A pair of black plastic cups sitting on top of each other.

    CYC Nylon Bearing Covers – Pair

    $8.00
    CYC Nylon Bearing Covers - Pair
     
    Add to cart Details
  • A bunch of wires that are connected to each other

    Gen 3 Stealth and X1 Pro Controller Extension Wires

    $25.00
    Gen 3 Stealth and X1 Pro Controller Extension Wires
     
    Add to cart Details
  • A set of parts for the camera and other accessories. A black kit with some parts attached to it

    Gen 3 Stealth and X1 Pro Controller Mounting Bracket

    $25.00
    CYC Gen 3 Stealth and X1 Pro controller Mounting Bracket
    Installation Guide provided, please full details.
     
    Add to cart Details
  • A black cord with an orange end and a white button A black cord with an orange end and a white button

    CYC Magnetic Brake Sensors

    $23.00
    CYC Magnetic Break Sensors Includes: 2x magnetic brake sensors & 2x magnets. Installation guide provided. Not compatible with X1 Pro Gen 1. Please see full description
     
    Add to cart Details
  • A black cable with an electric wire attached to it. A black cable with an electric power cord attached to it.

    CYC 1 to 2 Wiring with Throttle Option

    $20.00 – $35.00
    CYC 1 to 2 Wiring with Throttle Upgrade Option The 1 to 2 wiring harness connects your controller to the display and the throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-2 wiring harness
    •  Optional Upgrade: Thumb throttle/ Full twist throttle/ Half-twist throttle
    Please see full description
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • A pair of black and silver electronic hand grips. A black cord with two red wires and a metal clamp.

    CYC 1 to 4 Wiring with Throttle and Brake Sensor Option

    $25.00 – $40.00
    CYC 1 to 4 Wiring with Throttle Upgrade and Brake Sensor Option The 1 to 4 wiring harness connects your controller to the display, brake sensors, and throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-4 wiring harness
    • Thumb throttle/ full twist throttle/ half-twist throttle (optional)
    • Magnetic brake sensors (optional)
    Please see full description
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • A black ring with a white background A black plastic ring with a white background

    Photon Chainring Set

    $60.00 – $130.00
    CYC Photon Chainring Set  This is the complete set needed to change or replace the CYC Photon chainring, select from 34 Tooth, 38 Tooth, 42 Tooth or 50 Tooth. Includes:
    1. Starfish adaptor
    2. Chainring
    3. Aluminum chainring cover
    Please see full description.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • A black cable with green light on it. A black cable with green light on it.

    CYC 1 to 1 Wiring Harness

    $12.00
    CYC 1 to 1 Wiring Harness The 1 to 1 wiring harness connects your CYC Photon controller to the display. When using display only without a throttle.  Keeps wiring slim and clean. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-1 wiring harness
    Please see full description
     
    Add to cart Details
  • A group of different types of rings sitting on top of each other. A group of nine black plates with a white background

    CYC 42 Tooth Sprocket and Chainring Cover

    $40.00
    CYC 42 Tooth Sprocket and Chainring Cover
    For use on your existing 38-50 T Chainring Adapter.  Must use 2-prong tool that came with your kit to remove and install.
    Specifications:
    • 42 Tooth Sprocket
    • Chainring Cover
    Please see full description
    Add to cart Details
  • Black metal motor with cooling fins. Bicycle Motor Works

    CYC X12 Controller

    $288.00

    NEW X12 Controller - 5,000 Watts!

    Be the first to receive the new, long awaited X12 Controller for a direct swap out on your X1 Pro Gen 3!
    • Runs 36v-72v eBike Batteries
    • 8 Gauge Phase Wires
    • The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
    • Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
    Please read full description.  
    Add to cart Details

© Copyright 2013 - 2015 | Bicycle Motor Works operated by GutenMarkt, Inc.

Go to Top