FacebookInstagramYouTubeLinkedIn
  • Park Tool IB-3 multi-tool in hand. Bicycle Motor Works

    Park Multi-Tool

    $39.99
    Park Tool, IB-3, I Beam Multi-Tool
    • 3,4,5,6 and 8mm Hex wrench
    • Straight blade screwdriver
    • IB-2 includes above plus 1.5, 2, 2.5 Hex and T-25 Torx
    • IB-3 includes above plus: composite wrapped tire lever two spoke wrenches and a 10-speed compatible chain tool
    Please see full description.
    Add to cart Details
  • Black electric motor with wires and logo. Bicycle Motor Works -eBike Kits

    CYC X1 Pro Gen 4 Motor

    $293.00

    Swap your X1 Pro Gen 3

    with the X1 Pro Gen 4 Motor (includes the NEW X12 Controller - 5,000 Watts)!

    • Runs 36v-72v eBike Batteries
    • 8 Gauge Phase Wires
    • The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
    • Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
    Please read full description.  
    Add to cart Details
  • A black disk with a nut and screw on it. A black metal disc with nuts and bolts on top.

    CYC Photon Chainring Removal Tool

    $18.00
    CYC PHOTON Chainring Removal Tool

    Finally available, the tool you’ve been waiting for!  Securely plug in this 5-pronged tool to your center chainring retention ring to remove and install your chainring assembly.  You can now easily switch between chainring sizes without contacting customer support for help.

    • Full 360 degree contact - means no slipping.
    • Built-in nut accepts a 22mm socket (or 7/8” if you must).
    • Use an actual torque wrench for worry-free installs.
    • Available in any color you want, as long as it’s black.
    • Compatible with your CYC Photon eConversion System.
    Please see full description.
     
    Add to cart Details
  • Black metal motor with cooling fins. Bicycle Motor Works

    CYC X12 Controller

    $288.00

    NEW X12 Controller - 5,000 Watts!

    Be the first to receive the new, long awaited X12 Controller for a direct swap out on your X1 Pro Gen 3!
    • Runs 36v-72v eBike Batteries
    • 8 Gauge Phase Wires
    • The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
    • Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
    Please read full description.  
    Add to cart Details
  • A black box with wires attached to it.

    Dual Battery Parallel Module

    $99.99
    Buy 2 Battery Packs,
    Get this FREE!
    (limited-time offer, hurry while supplies last)
    Dual Battery Parallel Module - brought to you by Bicycle Motor Works
    20-72v, 120 amps
    Now you can safely run two battery packs in parallel.  Double your current, double your range, double you fun!
    Size of module: 63mm x 78mm x 25mm
    If you don’t already know, without a protective circuit there are many dangers to using two battery packs in parallel in order to increase your range.  This smart module eliminates those dangers, and it allows you to easily and safely combine two packs of the same nominal voltage.
    When the packs are at the same voltage level, the module will draw equally from each pack to power your motor.  If the packs are at different voltage levels, the module will draw on the higher voltage pack until the voltage levels become equal.  At that point both packs will be combined to power your motor.
    Use two battery packs of equal nominal voltage. You can combine two packs of different capacity (ie: 10ah + 15ah)
    See full description.
     
    Add to cart Details
  • A group of different types of rings sitting on top of each other. A group of nine black plates with a white background

    CYC 42 Tooth Sprocket and Chainring Cover

    $40.00
    CYC 42 Tooth Sprocket and Chainring Cover
    For use on your existing 38-50 T Chainring Adapter.  Must use 2-prong tool that came with your kit to remove and install.
    Specifications:
    • 42 Tooth Sprocket
    • Chainring Cover
    Please see full description
    Add to cart Details
  • A black cable with green light on it. A black cable with green light on it.

    CYC 1 to 1 Wiring Harness

    $12.00
    CYC 1 to 1 Wiring Harness The 1 to 1 wiring harness connects your CYC Photon controller to the display. When using display only without a throttle.  Keeps wiring slim and clean. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-1 wiring harness
    Please see full description
     
    Add to cart Details
  • A black ring with a white background A black plastic ring with a white background

    Photon Chainring Set

    $60.00 – $130.00
    CYC Photon Chainring Set  This is the complete set needed to change or replace the CYC Photon chainring, select from 34 Tooth, 38 Tooth, 42 Tooth or 50 Tooth. Includes:
    1. Starfish adaptor
    2. Chainring
    3. Aluminum chainring cover
    Please see full description.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • A pair of black and silver electronic hand grips. A black cord with two red wires and a metal clamp.

    CYC 1 to 4 Wiring with Throttle and Brake Sensor Option

    $25.00 – $40.00
    CYC 1 to 4 Wiring with Throttle Upgrade and Brake Sensor Option The 1 to 4 wiring harness connects your controller to the display, brake sensors, and throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-4 wiring harness
    • Thumb throttle/ full twist throttle/ half-twist throttle (optional)
    • Magnetic brake sensors (optional)
    Please see full description
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • A black cable with an electric wire attached to it. A black cable with an electric power cord attached to it.

    CYC 1 to 2 Wiring with Throttle Option

    $20.00 – $35.00
    CYC 1 to 2 Wiring with Throttle Upgrade Option The 1 to 2 wiring harness connects your controller to the display and the throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-2 wiring harness
    •  Optional Upgrade: Thumb throttle/ Full twist throttle/ Half-twist throttle
    Please see full description
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • A black cord with an orange end and a white button A black cord with an orange end and a white button

    CYC Magnetic Brake Sensors

    $23.00
    CYC Magnetic Break Sensors Includes: 2x magnetic brake sensors & 2x magnets. Installation guide provided. Not compatible with X1 Pro Gen 1. Please see full description
     
    Add to cart Details
  • A set of parts for the camera and other accessories. A black kit with some parts attached to it

    Gen 3 Stealth and X1 Pro Controller Mounting Bracket

    $25.00
    CYC Gen 3 Stealth and X1 Pro controller Mounting Bracket
    Installation Guide provided, please full details.
     
    Add to cart Details

© Copyright 2013 - 2015 | Bicycle Motor Works operated by GutenMarkt, Inc.

Go to Top