-
Sale!Looking for an easy-change, worry-free Battery Charger? Take a look at this Aluminum Blue HD Case, which includes a circulation fan to keep the charger cooler - for a longer life. 58.8V 3A Lithium Battery Charger for 52V Li-ion Ebike XT60 Connector - 110-220v
-
Sale!Looking for an easy-change, worry-free Battery Charger? Take a look at this sleek HD Case, which includes a circulation fan to keep the charger cooler - for a longer life. 84V 3A Lithium Battery Charger for 72V Li-ion Ebike XT60 Connector - 110v
-
CYC 1 to 1 Wiring Harness The 1 to 1 wiring harness connects your CYC Photon controller to the display. When using display only without a throttle. Keeps wiring slim and clean. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
- 1-1 wiring harness
-
CYC 1 to 2 Wiring with Throttle Upgrade Option The 1 to 2 wiring harness connects your controller to the display and the throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
- 1-2 wiring harness
- Optional Upgrade: Thumb throttle/ Full twist throttle/ Half-twist throttle
-
CYC 1 to 4 Wiring with Throttle Upgrade and Brake Sensor Option The 1 to 4 wiring harness connects your controller to the display, brake sensors, and throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
- 1-4 wiring harness
- Thumb throttle/ full twist throttle/ half-twist throttle (optional)
- Magnetic brake sensors (optional)
-
CYC PHOTON Chainring Removal Tool
Finally available, the tool you’ve been waiting for! Securely plug in this 5-pronged tool to your center chainring retention ring to remove and install your chainring assembly. You can now easily switch between chainring sizes without contacting customer support for help.
- Full 360 degree contact - means no slipping.
- Built-in nut accepts a 22mm socket (or 7/8” if you must).
- Use an actual torque wrench for worry-free installs.
- Available in any color you want, as long as it’s black.
- Compatible with your CYC Photon eConversion System.
-
Swap your X1 Pro Gen 3
with the X1 Pro Gen 4 Motor (includes the NEW X12 Controller - 5,000 Watts)!
- Runs 36v-72v eBike Batteries
- 8 Gauge Phase Wires
- The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
- Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
-
NEW X12 Controller - 5,000 Watts!
Be the first to receive the new, long awaited X12 Controller for a direct swap out on your X1 Pro Gen 3!- Runs 36v-72v eBike Batteries
- 8 Gauge Phase Wires
- The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
- Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
-
The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready. Includes:
- DS103 display
- Nominal Voltage = 36-52V
- Waterproof = IP65
- Controller Compatibility = X6P, X6, & X12
- Operating temperature = -20°C to 60°C
- Screen specification = 3.5” colored TFT (480*320pixels)
-
Buy 2 Battery Packs,Get this FREE!(limited-time offer, hurry while supplies last)Dual Battery Parallel Module - brought to you by Bicycle Motor Works20-72v, 120 ampsNow you can safely run two battery packs in parallel. Double your current, double your range, double you fun!Size of module: 63mm x 78mm x 25mmIf you don’t already know, without a protective circuit there are many dangers to using two battery packs in parallel in order to increase your range. This smart module eliminates those dangers, and it allows you to easily and safely combine two packs of the same nominal voltage.When the packs are at the same voltage level, the module will draw equally from each pack to power your motor. If the packs are at different voltage levels, the module will draw on the higher voltage pack until the voltage levels become equal. At that point both packs will be combined to power your motor.Use two battery packs of equal nominal voltage. You can combine two packs of different capacity (ie: 10ah + 15ah)See full description.
-
This e-bike battery cage is the most ideal holder for your 52v e-bike battery pack! Don't go on another adventure without it.
Secure your 52V Battery Pack securely with this lightweight, aluminum cage that mounts to your bike frame. Strap in your battery pack with the dual nylon webbing cinch wraps, with rubberized grips for added protection. See Details for more information. -
The CYC eBike Headlights are ideal for night rides. With high and low beam lights, you can ride comfortably in lowlight situations. Includes:
- eBike low & high beam headlights
- 2x mounting sets for each light
- Bolts & hex keys needed
-
- Connector = XT-90 male & female connector
- Compatibility = X1 Stealth, X1 Pro, & Photon kits
- Power consuption = 18W per bulb
- Supported Voltages = 36V to 72V nominal voltage
- See full description for details.
-
ISIS Crank Arm Set, for your CYC Gen 3 and Photon CYC's ISIS crank arm set is a 5 degrees off-set, made to be paired with the Gen 3 and Photon kits. Ride with confidence knowing that your cranks won't give in even in extreme terrains. Includes:
- Left & Right side crank arm
- Length Options: 165mm or 175mm
- Material = 7075-t6 aluminium
- Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3, Photon
-
CYC Speed Sensor and Bluetooth Module (X6 and X12 only)NOTE: This is for the X6 and X12 ControllerThe CYC speed sensors reads your speed via pulses detected from the speed sensor magnet as it moves with your wheel. This unit also houses the Bluetooth control module that is needed to connect to the CYC Ride Control app.- 7 Pin Male Connector- Includes Magnet- Installation GuidePlease read full description
-
The SW102 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's convenient formfactor leaves you with plenty of space on your handlebars. Plug-n-play ready. Includes:
- SW102 display
- Nominal Voltage = 36-52V
- Waterproof = IP65
- Controller Compatibility = X6P, X6, & X12
- Operating temperature = -20°C to 60°C
- Screen specification = 1.3”OLED(64*128pixels)