Upgrades and Replacement Parts for your CYC eBike Conversion Kit

  • The SW102 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's convenient formfactor leaves you with plenty of space on your handlebars. Plug-n-play ready. Includes:
    • SW102 display
    Specifications:
    • Nominal Voltage = 36-52V
    • Waterproof = IP65
    • Controller Compatibility = X6P, X6, & X12
    • Operating temperature = -20°C to 60°C
    • Screen specification = 1.3”OLED(64*128pixels)
    Please see full description.  
  • CYC Right Bottom Bracket Cup with Gen 3 Freewheel and Torque Sensor Assembly with Nylon Cover
    For Gen 3 X1 Stealth and X1 Pro only.  Includes HD Freewheel and Torque Sensor for easy replacement.
     
  • CYC Retaining Lock Ring, for you Gen 3 models. Includes: 1x Left Retaining Lock Ring Compatible with CYC X1 Gen 3 ISIS splined spindle only.13 Please see full description.  
  • Photon Chainring Set

    $60.00$130.00
    CYC Photon Chainring Set  This is the complete set needed to change or replace the CYC Photon chainring, select from 34 Tooth, 38 Tooth, 42 Tooth or 50 Tooth. Includes:
    1. Starfish adaptor
    2. Chainring
    3. Aluminum chainring cover
    Please see full description.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • CYC Speed Sensor and Bluetooth Module (X6 and X12 only) 
    NOTE: This is for the X6 and X12 Controller
    The CYC speed sensors reads your speed via pulses detected from the speed sensor magnet as it moves with your wheel.  This unit also houses the Bluetooth control module that is needed to connect to the CYC Ride Control app.
    - 7 Pin Male Connector
    - Includes Magnet
    - Installation Guide
    Please read full description
     
  • ISIS Crank Arm Set, for your CYC Gen 3 and Photon CYC's ISIS crank arm set is a 5 degrees off-set, made to be paired with the Gen 3 and Photon kits. Ride with confidence knowing that your cranks won't give in even in extreme terrains. Includes:
    • Left & Right side crank arm
    • Length Options: 165mm or 175mm
    Specifications:
    • Material = 7075-t6 aluminium
    • Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3,  Photon
    See full description.  
  • CYC Gen 3 Stealth and X1 Pro controller Mounting Bracket
    Installation Guide provided, please full details.
     
  • Gen 3 Stealth and X1 Pro Controller Extension Wires
     
  • CYC Thumb Throttle for your CYC X1 Pro, Photon or Stealth eBike. Includes: 1x universal thumb throttle Specifications:
    • Left or right side handlebar mounting
    • Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3, & Photon
    Please see full description.  
  • CYC Speed Sensor Extension Wire, for your CYC x1 PRO Gen 3, Gen 3 Stealth or Photon eBike. Includes 1x extension wire for speed sensor. Speed sensor extension wire for CYC X6/ X12, 7-pin male to female cable, Length = 300mm/ 650mm See full description.  
  • The CYC eBike Headlights are ideal for night rides. With high and low beam lights, you can ride comfortably in lowlight situations. Includes:
    • eBike low & high beam headlights
    • 2x mounting sets for each light
    • Bolts & hex keys needed
    Specification:
      • Connector = XT-90 male & female connector
      • Compatibility = X1 Stealth, X1 Pro, & Photon kits
      • Power consuption = 18W per bulb
      • Supported Voltages = 36V to 72V nominal voltage
    • See full description for details.
     
  • CYC Half Twist Throttle for your CYC X1 Gen 3 Pro, Stealth or Photon eBike.
    • Compatible with X1 Gen 3 Pro, Stealth or Photon
    • Includes: throttle and matching grip Connector: Julet
    Please see full description.  
Go to Top