- Compatible with X1 Gen 3 Pro, Stealth or Photon
- Includes: throttle and matching grip Connector: Julet
-
CYC Half Twist Throttle for your CYC X1 Gen 3 Pro, Stealth or Photon eBike. -
CYC Full Twist Throttle: for your CYC X1 Stealth, Pro or Photon ebike. Includes 1x full twist throttle and matching grip Motor compatibility: X1 Pro, X1 Stealth and Photon Controllers compatibility: BAC855, BAC2000, X6, and X12 Please see full description. -
CYC Aluminum Cover Replacement for your CYC X1 Pro eBike.- Aluminum cover replacement for original glass cover. Compatible with X1 Pro
-
The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready. Includes:- DS103 display
- Nominal Voltage = 36-52V
- Waterproof = IP65
- Controller Compatibility = X6P, X6, & X12
- Operating temperature = -20°C to 60°C
- Screen specification = 3.5” colored TFT (480*320pixels)
-
NEW X12 Controller - 5,000 Watts!
Be the first to receive the new, long awaited X12 Controller for a direct swap out on your X1 Pro Gen 3!- Runs 36v-72v eBike Batteries
- 8 Gauge Phase Wires
- The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
- Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
-
THE MOUNTAIN CRUSHER, ALL-TERRAIN RIDING THRILL Power mighty with the X1 Stealth Gen 3. Designed for all terrains, climb that mountain with advanced torque sensing, instant throttle capabilities, and customized tuning. Made for a powerful, performance enhanced riding experience.- RATED POWER: 1500W
- PEAK TORQUE: 150N.m.
- COMPATIBLE: 36V to 52V
- CHAINRING OPTIONS: 32T & 38T (30-46T with BCD104)
- BOTTOM BRACKET OPTIONS: 68-120MM
- BB92 SUPPORTED
- torque sensing capabilities
- fully customizable mobile app
- Range of bottom bracket sizes
- High clearance
- Fits all frame types including carbon
- 2 rider modes (e.g., street, off-road)
- 9 assist levels
Get an EXTRA 10% OFF select Packs!
To claim your special offer, add the CYC Stealth to your cart.
-
Swap your X1 Pro Gen 3
with the X1 Pro Gen 4 Motor (includes the NEW X12 Controller - 5,000 Watts)!
- Runs 36v-72v eBike Batteries
- 8 Gauge Phase Wires
- The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
- Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
-
The Ultimate High Power Combo - NEW from CYC Motors- The X1 Pro Gen 4 - 5,000 Watts out of the box!!!
- Beefier Motor, includes the New X12 Controller
- RATED POWER: 5000W
- PEAK TORQUE: 250N.m./250N.m.
- COMPATIBLE: 36V to 72V
- CHAINRING OPTIONS: 32T & 38T (30-52T with BCD104)
- BOTTOM BRACKET OPTIONS: 68-120MM
Fits All Common Bottom Brackets: The Gen 4 X1 PRO fits all standard and fat bike bottom brackets from 68mm to 120mm. It has a special BB92 Version which has a spot on chainline. BB92 Pressfit frame is common in modern mountain bike frame. It is typically very difficult to convert BB92 bike into electric due to the offset chainline. The BB92 is designed to be direct fit and with a perfect chainline of 51mm.CYC Ride Control:Pair the CYC Ride Control mobile app with the X-Controller Series and it gives you the ultimate freedom to ride your way. Via Bluetooth connectivity, we have ensured that your ebike experience is now more integrated than ever.Torque & Cadence Sensors: X1 PRO comes with a Torque sensor that is used in pedal assist mode. The torque sensor measures how hard and cadence measures how fast you pedal. These are collected and processed together by the controller to provide natural feeling of pedal assist and calculates how much power the motor should output correspondingly. A big bonus is that it also measures and records your own power via the mobile app so you can monitor your exercise rate. You can also customize the proportion of the motor power output in case you want to change the ratio of assist. EMTB mode when using comparable power levels.Warning: This beast is for the thrill seeker enthusiast. Read full description before you accept more power into your life.
Special Offer: 10% OFF select packs! To claim this special offer, customize your CYC kit and add to the cart.
-
CYC PHOTON Chainring Removal ToolFinally available, the tool you’ve been waiting for! Securely plug in this 5-pronged tool to your center chainring retention ring to remove and install your chainring assembly. You can now easily switch between chainring sizes without contacting customer support for help.
- Full 360 degree contact - means no slipping.
- Built-in nut accepts a 22mm socket (or 7/8” if you must).
- Use an actual torque wrench for worry-free installs.
- Available in any color you want, as long as it’s black.
- Compatible with your CYC Photon eConversion System.
-
Powerful, Quiet, Lightweight and Intuitive.
The Photon is beautifully designed and created by CYC Motor, Ltd., the Photon brings you a High Performance and state-of-the-art E-bike conversion kit unlike any other. The research and thoughtfulness put into this model, brings you technology advancements unfound in other factory model mid-drive motors. Featuring an easy DIY plug-n-play installation, simple programming that can also be accomplished through your smart phone, and much more. The package includes everything you need to convert your bike except the battery:- Motor body with Gen 3 torque sensing freewheel module
- Built-in CYC XP6 controller
- Chainring with chainring cover
- Bottom bracket assembly
- Crank set
- Peripherals including
- Display
- Waterproof wiring
- Thumb throttle
- Speed sensor
- Brake sensors (optional)
- User manual (ecopy)
- eBike Headlights (optional)
-
CYC Nylon Bearing Covers - Pair -
CYC Magnetic Break Sensors Includes: 2x magnetic brake sensors & 2x magnets. Installation guide provided. Not compatible with X1 Pro Gen 1. Please see full description
