• Sale!

    eBike Battery Pocket Rocket II 52v 8ah

    Original price was: $449.99.Current price is: $374.99.
    The Pocket Rocket II is a Mega 52v Lithium Battery for your Electric Bike. It is the best bang for your buck for mini packs, as it's packed with 8 Amp hours! Read full description for details on this lovely Ebike Battery. USA MADE   
  • The Pocket Rocket II is a Mega 52v Lithium Battery for your Electric Bike. It is the best bang for your buck for mini packs, as it's packed with 8 Amp hours! Read full description for details on this lovely Ebike Battery. USA MADE   
  • Swap your X1 Pro Gen 3

    with the X1 Pro Gen 4 Motor (includes the NEW X12 Controller - 5,000 Watts)!

    • Runs 36v-72v eBike Batteries
    • 8 Gauge Phase Wires
    • The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
    • Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
    Please read full description.  
  • NEW X12 Controller - 5,000 Watts!

    Be the first to receive the new, long awaited X12 Controller for a direct swap out on your X1 Pro Gen 3!
    • Runs 36v-72v eBike Batteries
    • 8 Gauge Phase Wires
    • The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
    • Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
    Please read full description.  
  • CYC Right Bottom Bracket Cup with Gen 3 Freewheel and Torque Sensor Assembly with Nylon Cover
    For Gen 3 X1 Stealth and X1 Pro only.  Includes HD Freewheel and Torque Sensor for easy replacement.
     
  • Photon Chainring Set

    $60.00$130.00
    CYC Photon Chainring Set  This is the complete set needed to change or replace the CYC Photon chainring, select from 34 Tooth, 38 Tooth, 42 Tooth or 50 Tooth. Includes:
    1. Starfish adaptor
    2. Chainring
    3. Aluminum chainring cover
    Please see full description.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Buy 2 Battery Packs,
    Get this FREE!
    (limited-time offer, hurry while supplies last)
    Dual Battery Parallel Module - brought to you by Bicycle Motor Works
    20-72v, 120 amps
    Now you can safely run two battery packs in parallel.  Double your current, double your range, double you fun!
    Size of module: 63mm x 78mm x 25mm
    If you don’t already know, without a protective circuit there are many dangers to using two battery packs in parallel in order to increase your range.  This smart module eliminates those dangers, and it allows you to easily and safely combine two packs of the same nominal voltage.
    When the packs are at the same voltage level, the module will draw equally from each pack to power your motor.  If the packs are at different voltage levels, the module will draw on the higher voltage pack until the voltage levels become equal.  At that point both packs will be combined to power your motor.
    Use two battery packs of equal nominal voltage. You can combine two packs of different capacity (ie: 10ah + 15ah)
    See full description.
     
  • The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready. Includes:
    • DS103 display
    Specifications:
    • Nominal Voltage = 36-52V
    • Waterproof = IP65
    • Controller Compatibility = X6P, X6, & X12
    • Operating temperature = -20°C to 60°C
    • Screen specification = 3.5” colored TFT (480*320pixels)
    Please see full description.  
  • The SW102 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's convenient formfactor leaves you with plenty of space on your handlebars. Plug-n-play ready. Includes:
    • SW102 display
    Specifications:
    • Nominal Voltage = 36-52V
    • Waterproof = IP65
    • Controller Compatibility = X6P, X6, & X12
    • Operating temperature = -20°C to 60°C
    • Screen specification = 1.3”OLED(64*128pixels)
    Please see full description.  
  • ISIS Crank Arm Set, for your CYC Gen 3 and Photon CYC's ISIS crank arm set is a 5 degrees off-set, made to be paired with the Gen 3 and Photon kits. Ride with confidence knowing that your cranks won't give in even in extreme terrains. Includes:
    • Left & Right side crank arm
    • Length Options: 165mm or 175mm
    Specifications:
    • Material = 7075-t6 aluminium
    • Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3,  Photon
    See full description.  
  • The CYC eBike Headlights are ideal for night rides. With high and low beam lights, you can ride comfortably in lowlight situations. Includes:
    • eBike low & high beam headlights
    • 2x mounting sets for each light
    • Bolts & hex keys needed
    Specification:
      • Connector = XT-90 male & female connector
      • Compatibility = X1 Stealth, X1 Pro, & Photon kits
      • Power consuption = 18W per bulb
      • Supported Voltages = 36V to 72V nominal voltage
    • See full description for details.
     
  • CYC 42 Tooth Sprocket and Chainring Cover
    For use on your existing 38-50 T Chainring Adapter.  Must use 2-prong tool that came with your kit to remove and install.
    Specifications:
    • 42 Tooth Sprocket
    • Chainring Cover
    Please see full description
Go to Top